sdlva s - smt 11 11 - 1 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 successive detection log video amplifier (sdlva), 0.5 - 18.5 ghz the HMC1013LP4E is a successive detection log video amplifer which operates from 0.5 to 18.5 ghz. the HMC1013LP4E provides a logging range of 67 db. this device offers typical fast rise/fall times of 5/15 ns and a superior delay time of only 10 ns. the HMC1013LP4E log video output slope is typically 15 mv/db. maximum recovery times are less than 40 ns. the HMC1013LP4E is available in a highly com- pact 4x4 mm smt plastic package and is ideal for high speed channelized receiver applications. general description features functional diagram high logging range: 67 db (-62 to +5 dbm) output frequency flatness: 2 db log linearity: 2 db fast rise/fall times: 5/15 ns single positive supply: +3.3v esd sensitivity (hbm): class 1a 24 lead 4x4mm smt package: 16mm 2 typical applications the HMC1013LP4E is ideal for: ? ew, elint & ifm receivers ? df radar systems ? ecm systems ? broadband test & measurement ? power measurement & control circuits ? military & space applications electrical specifcations, t a = +25 c vcc1 = vcc2 = vcc3= +3.3v, en=3.3v parameter conditions typ. units input frequency range [1] 0.5 - 18.5 ghz frequency flatness 2 db log linearity pin = -60 to +5 dbm 2 db log linearity over temperature 2 db minimum logging range to 3 db error -62 dbm maximum logging range to 3 db error +5 dbm input return loss 8 db log video minimum output voltage 0.9 v log video maximum output voltage 1.9 v log video output rise time 10% to 90% 5 ns log video output fall time 90% to 10% 15 ns log video recovery time @ 10 ghz 38 ns log video output slope 15 mv/db log video output slope variation over temperature @ 10 ghz 6.2 v/dbc log video propagation delay 10 ns supply current (icc1) 7 ma supply current (icc2) 90 ma supply current (icc3) 86 ma [1] video output load should be 1k ohm or higher.
sdlva s - smt 11 11 - 2 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 successive detection log video amplifier (sdlva), 0.5 - 18.5 ghz error flatness vs. input power over frequency [1] [2] video out & error vs. input power, fin = 500 mhz video out & error vs. input power, fin = 1 ghz video out & error vs. input power, fin = 2 ghz video out & error vs. input power, fin = 6 ghz video out & error vs. input power, fin = 10 ghz -8 -6 -4 -2 0 2 4 6 8 -70 -60 -50 -40 -30 -20 -10 0 10 20 1 ghz 2 ghz 6 ghz 10 ghz 14 ghz 18 ghz error (db) input power (dbm) 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -4 -3 -2 -1 0 1 2 3 4 -70 -60 -50 -40 -30 -20 -10 0 10 20 ideal video out +25c video out +85c video out -40c err +25c err +85c err -40c video out (v) error (db) input power (dbm) 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -4 -3 -2 -1 0 1 2 3 4 -70 -60 -50 -40 -30 -20 -10 0 10 20 ideal video out +25c video out +85c video out -40c err +25c err +85c err -40c video out (v) error (db) input power (dbm) 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -4 -3 -2 -1 0 1 2 3 4 -70 -60 -50 -40 -30 -20 -10 0 10 20 ideal video out +25c video out +85c video out -40c err +25c err +85c err -40c video out (v) error (db) input power (dbm) 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -4 -3 -2 -1 0 1 2 3 4 -70 -60 -50 -40 -30 -20 -10 0 10 20 ideal video out +25c video out +85c video out -40c err +25c err +85c err -40c video out (v) error (db) input power (dbm) 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -4 -3 -2 -1 0 1 2 3 4 -70 -60 -50 -40 -30 -20 -10 0 10 20 ideal video out +25c video out +85c video out -40c err +25c err +85c err -40c video out (v) error (db) input power (dbm) [1] an average ideal line is used to calculate error curves. [2] at 25 c.
sdlva s - smt 11 11 - 3 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 successive detection log video amplifier (sdlva), 0.5 - 18.5 ghz video out & error vs. input power, fin = 18 ghz video out vs. frequency over input power & temperature video out vs. frequency over input power & bias voltage video out & error vs. input power, fin = 14 ghz 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -4 -3 -2 -1 0 1 2 3 4 -70 -60 -50 -40 -30 -20 -10 0 10 20 ideal video out +25c video out +85c video out -40c err +25c err +85c err -40c video out (v) error (db) input power (dbm) 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 0 2 4 6 8 10 12 14 16 18 20 3.45v 3.30v 3.15v frequency (ghz) video out (v) -10 dbm -25 dbm -40 dbm 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -4 -3 -2 -1 0 1 2 3 4 -70 -60 -50 -40 -30 -20 -10 0 10 20 ideal video out +25c video out +85c video out -40c err +25c err +85c err -40c video out (v) error (db) input power (dbm) 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 0 2 4 6 8 10 12 14 16 18 20 +25c +85c -40c frequency (ghz) video out (v) -10 dbm -25 dbm -40 dbm video out & error vs. input power, fin = 20 ghz 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -4 -3 -2 -1 0 1 2 3 4 -70 -60 -50 -40 -30 -20 -10 0 10 20 ideal video out +25c video out +85c video out -40c err +25c err +85c err -40c video out (v) error (db) input power (dbm)
sdlva s - smt 11 11 - 4 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 successive detection log video amplifier (sdlva), 0.5 - 18.5 ghz rise time for various frequencies @ 0 dbm fall time for various frequencies @ 0 dbm 0.8 1 1.2 1.4 1.6 1.8 2 2.2 0 10 20 30 40 50 2 ghz 10 ghz 18 ghz time (ns) video out (v) 0.8 1 1.2 1.4 1.6 1.8 2 2.2 0 20 40 60 80 100 120 140 160 180 200 2 ghz 10 ghz 18 ghz time (ns) video out (v) input return loss vs. frequency absolute maximum ratings vcc +3.6v enable +3.6v rf input power +13 dbm junction temperature 125 c continuous pdiss (t=85 c) derate 35.22 mw/c above 85 c 1.41 w thermal resistance (r th ) (junction to package bottom) 28.4 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a -30 -25 -20 -15 -10 -5 0 0 2 4 6 8 10 12 14 16 18 20 +25c +85c -40c input return loss (db) frequency (ghz) electrostatic sensitive device observe handling precautions
sdlva s - smt 11 11 - 5 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 successive detection log video amplifier (sdlva), 0.5 - 18.5 ghz outline drawing notes: 1. package body material: low stress injection molded plastic silica and silicon impregnated. 2. lead and ground paddle material: copper alloy. 3. lead and ground paddle plating: 100% matte tin 4. dimensions are in inches [millimeters]. 5. lead spacing tolerance is non-cumulative. 6. characters to be helvetica medium, .025 high, white ink, or laser mark located approx. as shown. 7. pad burr length shall be 0.15mm max. pad burr height shall be 0.05mm max. 8. package warp shall not exceed 0.05mm 9. all ground leads and ground paddle must be soldered to pcb rf ground. 10. refer to hittite application note for suggested pcb land pattern package information part number package body material lead finish msl rating package marking [1] HMC1013LP4E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h1013 xxxx [1] 4-digit lot number xxxx [2] max peak refow temperature of 260 c
sdlva s - smt 11 11 - 6 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 successive detection log video amplifier (sdlva), 0.5 - 18.5 ghz pin number function description interface schematic 1-2, 7, 9-10, 12-13, 16, 18-19, 21, 23 n/c the pins are not connected internally; however, all data shown herein was measured with these pins connected to rf/dc ground externally. 3, 5-6, 8, 11 gnd these pins and the exposed package bottom must be connected to a high quality rf/dc ground. 4 rfin rf input pin 14, 15 video_fb video_out video out and feedback. 17 en enable pin, connect to 3.3v supply for normal operation. total supply current reduced to less than 11ma when en is set to 0v. 20 vcc3 bias supply. connect supply voltage to these pins with appropriate fltering. see application circuit. pin descriptions
sdlva s - smt 11 11 - 7 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 successive detection log video amplifier (sdlva), 0.5 - 18.5 ghz pin descriptions (continued) pin number function description interface schematic 22, 24 vcc2, vcc1 bias supply. connect supply voltage to these pins with appropriate fltering. connect vcc2 with vcc1. see application circuit. application circuit note: video output load should be 1k ohm or higher.
sdlva s - smt 11 11 - 8 for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com HMC1013LP4E v00.0511 successive detection log video amplifier (sdlva), 0.5 - 18.5 ghz evaluation pcb list of materials for evaluation pcb eval01-HMC1013LP4E [1] item description j1 k-type connector j2 sma connector j3 - j6 dc pins c2 47 pf capacitor, 0402 pkg. c4 100 pf capacitor, 0402 pkg. c5-c7 10 nf capacitor, 0402 pkg. c8-c10 4.7 f capacitor, tantalum. r1-r4 0 ohm resistor, 0402 pkg. r5 120 ohm resistor, 0402 pkg. r8 49.9 ohm resistor, 0201 pkg. u1 HMC1013LP4E sdlva pcb [2] 126093 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 or arlon 25 fr the circuit board used in the application should use rf circuit design techniques. signal lines sho- uld have 50 ohm impedance while the package ground leads and exposed paddle should be con - nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. n/c pins should also be connected to ground. the evaluation circuit board shown is available from hit - tite upon request.
|
